Before: a 65-inch TV on a media console, a nest of cables behind it, a couch pushed back to get viewing distance, and a living room that never quite felt finished.

After: the TV floating at perfect eye level, cables routed and hidden, the console cleared for what it was actually meant to hold, and six extra square feet of floor space reclaimed.

That transformation is what a proper TV wall mount does for a Manhattan apartment — and it’s the most common job we do across all five boroughs.

Why a TV on a Console Doesn’t Work in Small NYC Spaces

In a typical New York City living room, the furniture layout is already constrained. The couch has to sit at a certain distance from the screen for comfortable viewing — and when the TV is on a console at floor level, that distance pushes the couch toward the middle of the room. You lose space, the room feels cramped, and the viewing angle is almost always wrong. Most TVs on media consoles sit too low, meaning you’re looking down at the screen rather than straight at it — which causes neck strain over time and makes the viewing experience noticeably worse.

A wall mount fixes all of this at once. The TV goes to the correct eye-level height, the couch can move back toward the wall, and the room suddenly has breathing room it didn’t have before.

What Goes Into a Proper TV Wall Mount

The hardware matters more than most people realize. A 65-inch TV can weigh 80–100 lbs depending on the model, and the mount needs to be rated for that load and properly anchored into the actual structure of the wall — not just the surface.

In Manhattan apartments, that means first identifying what you’re working with. Drywall over wood studs. Drywall over metal studs. Original plaster over wood lath. Concrete or masonry in newer or converted buildings. Each requires a completely different anchoring approach, and using the wrong hardware for the wall type is one of the most common ways mounted TVs end up on the floor.

We always use a stud finder, verify the stud location before drilling, and confirm the mount is appropriate for the specific wall construction. A TV that falls isn’t just an expensive problem — it’s a dangerous one.

Cable Management Is What Separates a Clean Install from a Messy One

The visual difference between a properly cabled TV mount and a sloppy one is significant. Cables hanging down from the TV and pooling behind the console undercut the whole point of the wall mount — the TV looks like it belongs in the air, but the cables tell a different story.

We route cables behind the wall using an in-wall cable management kit wherever building rules permit it. When in-wall routing isn’t an option (in some buildings or wall constructions), we dress cables neatly using surface-mounted raceways painted to match the wall. Either way, the result is a TV installation that looks intentional — not one where the wiring is visible from across the room.

What We Include in a Standard TV Mount

Every TV mount we do includes wall assessment, stud-finding, correct hardware for the wall type, mount installation, TV hang and level adjustment, and basic cable management. We bring our own tools and hardware — you don’t need to supply anything beyond the TV and the mount (and we can recommend mounts if you haven’t bought one yet).

Book a TV Mount in NYC

Standard TV mounts start at $175 and most jobs are done in under an hour. We work across all five boroughs — Manhattan, Brooklyn, Queens, the Bronx, and Staten Island — and most appointments are available within 48 hours of booking. Add cable management, shelf installation, or furniture assembly to the same visit and save $40 per additional service. Book at pictureperfectmounting.com.